Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 9N879 | FLUITEK CORP |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNH | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE AND OUTSIDE IN |
| AZTL | BODY OVERALL LENGTH | 4.438 INCHES NOMINAL |
| AZKQ | TEMP RATING | -45.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNQ | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | W/ CRES END CAPS AND CORE |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MATT | MATERIAL | RESIN SYNTHETIC FILTERING MEDIUM AND RUBBER BUNA N SEAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ADNP | DROP PRESSURE | 7.80 POUNDS PER SQUARE INCH |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | FIBER SYNTHETIC FILTERING MEDIUM |
| AGAV | END ITEM IDENTIFICATION | PALL IND.SERIES AH9999A12UP FILTERS |
| ABPM | BODY DIAMETER | 1.750 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL |